Above Ground Pool |
2 sets of pool specifications and plans. Pool Barrier Safety Information included with plans or included with application. 2 dimensional site plans showing setback requirements. Septic location if applicable. |
Yes |
Addition (Aluminum) |
2 sets of construction plans with the architect’s /engineer’s seal or 2 sets of current master plan engineering with Aluminum Framing Plan and copy of engineer’s authorization letter. Contractor must provide proof of passing the Master Filed Aluminum Structure Course. 2 dimensional site plans showing setback requirements. Septic location if applicable |
Yes |
Addition (Frame/Masonry) |
2 sets of construction plans with the architect’s / engineer’s seal; 2 truss packages and layout with the engineer’s seal; 2 sets of submittals. 2 dimensioned site plans showing setback requirements. Septic location if applicable. |
Yes |
Alteration |
2 sets of construction plans with the architect’s /engineer’s seal if change is structural or affects the building envelope… (Ex: convert garage to living area) or 2 copies scope of work list; 2 truss packets with the engineer’s seal if applicable; floor plan showing location of work and energy forms if change to habitable area. 2 sets of submittals. |
Yes |
Alteration (Aluminum) |
2 sets of construction plans with the architect’s / engineer’s seal or 2 sets of current master plan engineering with Aluminum Framing Plan and copy of engineer’s authorization letter if change is structural or affects the building envelope; 2 dimensional site plans showing setback requirements. 2 site plans if changing footprint of building; floor plan showing location of work; septic location; 2 sets of submittals. |
Yes |
Aluminum Structure with mobile home |
2 sets of construction plans with architect’s /engineer’s seal or 2 sets of current master plan engineering with Aluminum Framing Plan (including 4th wall construction) and copy of engineer’s authorization letter; 2 dimensioned site plans showing setback requirements. |
Yes |
Antenna |
2 sets of construction plans with the architect’s / engineer’s seal that will address wind load’ 1 survey with surveyor’s seal; 2 site plans if attached to a guy. |
Yes |
Barn/Storage Shed |
2 sets of construction plans with the architect’s / engineer’s seal; 2 truss packets with the engineer’s seal (if applicable); 2 dimensioned site plans showing setback requirements. If manufactured structure, DCA letter and 2 copies of approved DCA plans. |
Yes |
Building Moving |
House Moving application (no owner builders) & Single Family Residential application for foundation (2 sets foundation plans with architect’s / engineer’s seal), but pick only 1 work type (Building Moving) with house mover as main contractor & owner can do the foundation portion (just list owner as a sub). 2 dimensional site plans showing setback requirements. 2 signed and sealed floor plan showing any improvements (**additional plans or scope of work list if alterations or repairs) |
Yes |
Burglar Alarm / Security |
Low voltage alarms that can be plugged into an existing outlet, do not need a permit. If a circuit needs to be run, pick “Electrical” instead of burglar alarm. * |
|
Carport (Aluminum) |
2 sets of construction plans with the architect’s / engineer’s seal or 2 sets of current master plan engineering with Aluminum Framing Plan (including 4th wall construction) and copy of engineer’s authorization letter; 2 dimensional site plans showing setback requirements. |
Yes |
Carport (Frame/Masonry) |
2 sets of construction plans with the architect’s /engineer’s seal; 2 truss packets with the engineer’s seal if applicable; 2 dimensioned site plans showing setback requirements. |
Yes |
Deck |
2 sets of signed and sealed plans. Include guardrail plans if height above grade is 30” or greater. 2 dimensioned site plans showing setback requirements. |
Yes |
Demolition (Entire Structure) |
Square footage of building must be indicated; current use of building; well & septic status information (abandoned permits may be required). City Commission approval is required for all structures 50 years and older. |
|
Demolition (Partial) |
Not related to future use: square footage of building must be indicated; current use of building; floor plan indicating area to be demolished; well & septic status information (abandonment permits may be required). ***Demolition for purpose of addition or renovation must be submitted as part of the overall project. |
|
Dock |
2 sets of signed and sealed plans from an engineer or architect. 2 dimensioned site plans showing setback requirements. |
Yes |
Duplex (same parcel … 1 permit… no owner contractor since both would not be for personal use) |
2 sets of construction plans with the architect’s / engineer’s seal; 2 truss packets with the engineer’s seal, 2 dimensioned site plans showing setback requirements’ site plans should show shape & dimension of lot with street location & name, footprint of duplex, and driveway dimensions at property line and flare (DOT permit if connecting to a state road); 2 sets of submittals for each side of residence. |
Yes |
Electrical for Generator/Transfer Switch |
2 dimensioned site plans showing setback requirements. Generator specifications must be submitted for permit approval. Specifications on the transfer switch must be on the job site. |
|
Fence (Non-Structural and structural without footers)(Owner/renter contractor) |
2 dimensioned site plans showing property lines and location of fence. Structural supports of fence must face inward of property line. Height restrictions apply. |
Yes |
Fence (Non-Structural and structural without footers)(Licensed contractor) |
2 dimensioned site plans showing setback requirements. Structural components for fence must face inward toward property. Height restrictions apply. |
Yes |
Fence for Pool (Owner contractor) |
2 dimensioned site plans showing property lines and location of fence. Structural supports of fence must face inward of property line Height restrictions apply. |
Yes |
Fence for Pool (Licensed Contractor) |
2 dimensioned site plans showing property lines and location of fence. Structural supports of fence must face inward of property line. Height restrictions apply. |
Yes |
Fence (Structural, requiring footers) (Owner) |
2 sets construction plans (if being used as a retaining wall, see that category for plan requirements); 2 dimensioned site plans showing property lines and location of fence. Structural supports of fence must face inward of property line. Height restrictions apply. |
Yes |
Fence (Structural, requiring footers) (Licensed Contractor) |
2 sets construction plans (if being used as a retaining wall, see that category for plan requirements); 2 dimensioned site plans showing property lines and location of fence. Structural supports of fence must face inward of property line. Height restrictions apply. |
Yes |
Fire Alarm (Licensed contractor or Owner Contractor, must name fire alarm contractor as sub) |
3 sets Fire Alarm specifications to see if hard wired or not; 3 copies of floor plan showing all windows and exit doors; provide wiring diagram and location of all devices; 3 copies of battery calculations. |
|
Fire Sprinkler (Licensed contractor or if Owner Contractor, must name fire sprinkler contractor as sub) |
3 sets of construction plans including cut sheets, hydraulic calculations & schematics; 3 copies of floor plan showing all windows and exit doors; provide piping diagram with location of piping, sprinkler heads and hangars; 3 site plans showing source of water supply and underground piping; 3 sets of specification sheets. |
|
Fireplace/Chimney |
2 sets of construction plans with the architect’s / engineer’s seal; 2 dimensioned site plans showing setback requirements. |
Yes |
Garage |
2 sets of construction plans with the architect’s / engineer’s seal; 2 truss packets with the engineer’s seal; 2 dimensioned site plans showing setback requirements. 2 sets of all submittals. |
Yes |
Gas Connections |
1 fixture only: Permit required, but no riser diagram needed. Multiple fixtures: 2 riser diagrams that include type of gas, pressure, piping material, pipe sizes, run lengths & BTU ratings of utilization equipment. |
|
Generator |
Specifications on generator & transfer switch must be on the jobsite for inspection; (if electric only for future generator, see the instructions for “electrical for generator/transfer switch” instead); 2 dimensioned site plans showing setback requirements. |
Yes |
Generator with transfer switch |
Specifications on generator & transfer switch must be on the jobsite for inspection; (if electric only for future generator, see the instructions for “electrical for generator/transfer switch” instead); 2 dimensioned site plans showing setback requirements; name electric subcontractor, **if generator is existing and this is a change out, only an electrical permit is required. |
Yes |
Glass Room / Vinyl Room |
2 sets of construction plans with the architect’s / engineer’s seal or 2 sets of current master plan engineered pages with copy of engineer’s authorization letter; Contractor must provide proof of passing the Master Filed Aluminum Structures Course. 2 dimensioned site plans showing setback requirements; Name electric sub for Glass Rooms; do not need energy forms if non-conditioned (aluminum construction) … Vinyl Rooms: if removable panels need to be used it must be noted on the submission. |
|
HVAC (replacement) |
Replacing existing Unit. 2 dimensioned site plans showing setback requirements show location of disconnect and service receptacle. |
|
HVAC (Rooftop Equipment) |
2 sets of engineered connection details for curbs/stands. Show location of disconnecting means and service receptacle |
|
Hangar |
2 sets of construction plans with the architect’s / engineer’s seal; 2 dimensioned site plans showing setback requirements. If there is an office in the hangar, see “Addition (Frame/Masonry)” work type. |
Yes |
Hot Tub |
Portable hot tub/spa that is delivered and plugged into an existing outlet does not require a permit. If portable hot tub/spa is hard wired, it requires just an electrical permit, without any specifications. These hot tubs/spas generally come with a cover to secure the hot tub/spa when not in use. Barrier requirements apply.
In ground unit ( a package unit hot tub/spa). This requires plans similar to fiberglass pool. See “Swimming Pool” |
|
Liquid Propane Gas Installation (above ground and in ground) |
Tank installation and related gas connections. If tank existing, use “gas connection” work type instead. For generator being issued to another contractor, generator specifications are not required with this submittal. 2 copies of riser diagram for multiple connections; 2 site plans showing size of tank, location of tank and location of generator if applicable. |
Yes |
Mobile Home |
Manufacturer’s installation manual (for new units only): 2 copies manufacturer’s blocking diagram; HSMV Approved Manufactured Home Installation Worksheet; 2 dimensioned site plans showing setback requirements . 2 sets of all submittals. |
Yes |
Mobile Home Replacement |
Manufacturer’s installation manual (for new units only); 2 copies manufacturer’s blocking diagram; HSMV Approved Manufactured Home Installation Worksheet; 2 dimensioned site plans showing setback requirements. Documentation to waive impact fees must be submitted. 2 sets of all submittals. |
Yes |
Mobile Home Roof over |
2 sets of construction plans with the architect’s / engineer’s seal or 2 sets of current master plan engineering with roof layout plan and copy of engineer’s authorization letter. |
|
Other |
*** Requirements will vary… check for similarities with other work types.*** |
Possible |
Park Model/RV Perm. Setup |
Park Model: See “Mobile Home” requirements… RV Permanent Set Up (Zoning will only allow RVs in areas zoned for RV Parks) similar to “Mobile Home” requirements, but no set up book (need 2 copies of manufacturer’s tie down information); 2 dimensioned site plans showing setback requirements. |
Yes |
Patio (covered) and Foundation |
2 sets of construction plans with the architect’s/ engineer’s seal; 2 dimensioned site plans showing setback requirements |
Yes
|
Patio (covered) on Existing Foundation |
2 sets of construction plans with the architect’s/engineer’s seal; 2 dimensioned site plans showing setback requirements |
Yes
|
Pool Enclosure |
2 sets of construction plans with the architect’s / engineer’s seal or 2 sets of current master plan engineering with Aluminum Framing Plan and copy of engineer’s authorization letter; 2 dimensioned site plans showing setback requirements. Contractor must proof of passing the Master Filed Aluminum Structures Course. |
Yes
|
Renovation |
2 copies scope of work list; 2 copies floor plan (Existing and proposed)… if part or all of project more closely resembles “Alteration” or “Addition”, see those work types for possible requirement of engineered plans, etc. |
|
Repair |
2 sets of construction plans with the architect’s / engineer’s seal for all structural repairs; 2 copies scope of work list for non-structural repairs… if part or all of project more closely resembles a different work type, see that work type for requirements. |
Yes |
Reroof Metal or Tile |
2 copies of Sloped Roof Form and or Low Sloped Roof Form as appropriate (must include information on pitch and mean height to determine pressures); 2 copies manufacturer’s data for reroof material. Skylights (replacement): 2 sets of specifications and 2 footprint drawings of skylight location. |
|
Reroof/No Structural Change (Owner contractor) |
2 copies Sloped Roof Form and or Low Sloped Roof Form as appropriate; 2 copies manufacturer’s data for reroof material (not required for shingle roof). Skylights (replacement): 2 sets of specifications and 2 footprint drawings of skylight location. |
|
Reroof/ No Structural Change (Licensed contractor) |
2 copies Sloped Roof Form and or Low Sloped Roof Form as appropriate; 2 copies manufacturer’s data for reroof material (not required for shingle roof). Skylights (replacement): 2 sets of specifications and 2 footprint drawings of skylight location. |
|
Retaining Wall |
2 sets construction plans (may need to be engineered if construction plans don’t show standard engineering practices or if angle of repose is an issue); 2 dimensional site plans showing setback requirements |
Yes |
Screened Porch/Patio |
2 sets of construction plans with the architect’s / engineer’s seal; 2 dimensioned site plans showing setback requirements if aluminum construction, see “Addition(Alum)”. |
Yes |
Shed (Premanufactured) – 10 x12 or smaller |
Set-up booklet with wind load info; 2 dimensioned site plans showing setback requirements. Most Rubbermaid storage bins are exempt unless they have walk in doors & are very large |
Yes
|
Shed (Premanufactured) – larger than 10 x 12 |
2 sets of plans with the architect’s / engineer’s seal or 2 copies of full size copies DCA approved plans; if anchoring is not shown on plans need engineered anchoring plan; 2 dimensioned site plan showing setback requirements |
Yes
|
Shed (Wood/Masonry) – 10 x 12 or smaller |
2 sets of construction plans that include wind load info; 2 dimensional site plans showing setback requirements. |
Yes
|
Shed (Wood/Masonry) – larger than 10 x 12 |
2 sets of plans with the architect’s / engineer’s seal; 2 dimensioned site plans showing setback requirements |
Yes |
Functional Shutters |
**ALL engineered shutter systems require a permit ** (ex. engineered corrugated shutter) Condominium shutters (even if on an individual unit) are commercial and have different permitting requirements. Residential permits: 2 copies of footprint drawing showing location and sizes of windows; 2 sets of specifications; 2 copies of shutter schedule if applicable (usually for roll down or accordion shutters); name of electrical subcontractor if motorized. Master plans are not accepted in place of these requirements. |
|
Siding/Soffit/Fascia (no tear off) |
Manufacturer’s specifications to be posted at site for inspection. |
|
Siding/Soffit/Fascia (tear off and install) |
No structural change. Wall section (not required to have engineer’s seal) that show size/type of structural sheathing; manufacturer’s specifications to be posted on site for inspection. |
|
Single Family Residence (SFR) |
2 sets of construction plans with the architect’s / engineer’s seal; 2 truss packets with the engineer’s seal, 2 dimensioned site plans showing setback requirements; 2 sets of all submittal are required |
Yes |
Slab Foundation |
2 dimensioned site plans showing setback requirements. For slab only, a description of slab is required on permit application. For all other work where there will be vertical construction, a footing detail and signed and sealed plans will be required. |
Yes |
Solar |
2 sets plans with the architect’s / engineer’s seal for the fastening system or 2 copies master plan engineering pages; 2 copies of Testing Specification. |
|
Spa/Whirlpool/Pool Heater |
Refer to “Swimming Pool” requirements… if more than 1 gas outlet, needs 2 copies of the gas riser. 2 dimensioned site plans showing setback requirements |
Yes
|
Stucco |
Installing stucco over block does not require a permit. Stucco over frame: 2 copies of wall section from an engineer or architect is required |
|
Swimming Pool (Owner contractor) |
2 sets of construction plans with the architect’s / engineer’s seal or 2 sets master plan engineering for pool; 2 sets of construction plans with architect’s / engineer’s seal or 2 sets of current master plan engineering pages with copy of engineer’s authorization letter for screen enclosure or fence information on application & site plans; 2 copies of Chapter 41 from (Pool Safety Requirements); 2 dimensioned site plans showing setback requirements. ***NO POOL SUBMITTALS ALLOWED WITHOUT SAFETY FEATURE*** |
Yes |
Swimming Pool (Licensed contractor) |
2 sets of construction plans with the architect’s /engineer’s seal or 2 sets master plan engineering for pool; 2 sets of construction plans with the architect’s / engineer’s seal or 2 sets of current master plan engineering pages with copy of engineer’s authorization letter for screen enclosure or fence information on application & site plans; 1 copy of Chapter 41 form (Pool Safety Requirements); 2 dimensioned site plans showing setback
requirements. *** NO POOL SUBMITTALS ALLOWED WITHOUT SAFETY FEATURE*** |
Yes |
Townhouse (separate parcels… separate permits… owner contractor allowed for the parcel where he/she reside.) |
** THESE PERMITS NEED TO GO THROUGH THE PLANNING DIVISION PRIOR TO SUBMITTAL FOR BUILDING PERMITS** Refer to “Single Family Residence” requirements. |
Yes |
Window/Door Replacement (same size/no structural change) |
2 copies of footprint drawing for window/doors to be replaced. 2 sets of the manufacturer’s specifications and installation instructions. |
|
Window/Door Replacement (different size/structural change) |
2 sets of plans with the architect’s / engineer’s seal; 2 copies of footprint drawing for window/doors to be replaced. 2 sets of the manufacturer’s specifications and installation instructions. |
|
